DiGiCo SD5 Mikser, 8input/8output lokalt, MADI/HMA

• Faders 37 x 100mm touch-sensitive, motorised
• Screens 3 x 15” LCD high - resolution touch screens
• Meterbridge 2 x Custom Mounted LCD high-resolution TFT-LCD screens
• Up to 253 Input Channels
• Busses Up to 128 plus masters Aux / Group busses with full processing Mono / Stereo / LCR / 5.1
• Matrix Up to 24 Input / 24 Outputs with full processing
• Control Groups Up to 36, selectable for VCA-style, Moving fader, Mute Group
• Graphic Eq 32 x 32-band, Gain +/- 12dB
• Internal FX Up to 48 stereo effects comprising up to 16 floating point reverbs and up to 24 delay/chorus/pitch/enhancer
• Local I/O 8 x mic/line I/O, 8 x AES I/O
• MADI interface 3 redundant interfaces, BNC connectivity
• Optic interface Fibrecast optic
• Sampling rates 48kHz / 96kHz
• GPI/GPO 16 as standard, expandable to 32
• Ext Sync Wordclock, AES, Video, MADI, Optics
• Physical Dimensions 1465 mm (w) x 838mm (d) x 458 mm (h)
• Weight 116Kg (233 Kg with flightcase)
• Power Requirements 90V-260V, 50-60Hz, 532VA (340W)

Audio Specification

• Sample Rate: 48kHz, 44.1kHz or 96kHz
• Processing Delay: 2ms Typical @ 48k(60 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @96k
• Internal Processing: Up to 40-bit, Floating Point
• A>D & D>A: 24-bit Converter Bit Depth
• Frequency Response: +/- 0.6dB (20Hz – 20kHz)
• THD: <0.05% @ Unity Gain,: 10dB Input @ 1kHz
• Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
• Residual Output: <90dBu Typical
• Noise: (20Hz - 20kHz)
• Microphone Input: Better Than -126dB: Equivalent Noise
• Maximum Output Level: +22dBu
• Maximum Input Level: +22dBu

Processing Channel Specification
Input Channel

• Name: User-Defined / Presets
• Channel Selection: Mono / Stereo / Multi
• Input Routing: Main & Alternate Input
• Analogue Gain: -20 to +60dB
• Phase: Normal / Reverse
• Digital Trim: -40 to +40dB
• Delay: >1 Sec (Coarse & Fine Control)
• DiGiTuBe: Drive 0.01 - 50.0
• Bias 0 - 6
• LPF: 20 – 20kHz, 24dB/Oct
• HPF: 20 – 20kHz, 24dB/Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/
  Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Dynamics 1: Single or Multiband (3-Band)
  
  Compressor: On/Off
  Threshold; -60 – 0dB 
  Attack; 500us – 100ms 
  Release; 10ms – 10s 
  Ratio; 1:1 – 50:1 
  Gain; 0 to +40dB with 
  Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
  
  De-Esser: Threshold : 20us – 20ms
  Release : 1ms – 100ms
  Ratio : 1:1 – 50:1
  Ess-Band : Listen On/Off
  Ess-Band Filter Freq / Width: 20Hz – 20kHz
• Dynamics 2: On/Off
  
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms 
  Hold; 2ms – 2s 
  Release; 5ms – 5s 
  Range; 0 - 90dB 
  Key; Any Source 
  Key Listen 
  Freq/Width; 20 – 20kHz
  
  Compressor: On/Off
  Threshold; -60 – 0dB 
  Attack; 500us – 100ms 
  Release; 10ms – 10s 
  Ratio; 1:1 – 50:1 
  Gain; 0 to +40dB with 
  Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any Source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Input, EQ, Dyn, Aux, Pan, Fade/Mute, Inserts, Buss, Directs,
  Full Safe
• Output Routing: Buss, Insert A, Insert B, FX
  Direct: On/Off, Pre-Mute / Pre-Fade / Post-Fade, Level +/- 18dB
• Fader: 100mm Motorised Fader ∞ to +10dB

Processing Channel Specification
Aux / Group / Matrix Output

• Name: User-Defined / Presets
• Phase: Normal / Reverse
• Digital Trim: -20 to +60dB
• Delay: >1 Sec (Coarse & Fine control)
• DiGiTuBe: Drive 0.01 - 50.0
  Bias 0 - 6
• LPF: 20 – 20kHz, 24dB / Oct
• HPF: 20 – 20kHz, 24dB / Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 8 Band EQ: 4 band Parametric and 4 band parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hi Shelf, Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Dynamics 1: Single or Multiband (3-band)
  
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to +40dB
  with Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard, Med, Soft
  
  De-Esser: Threshold: 20us – 20ms
  Release: 1ms – 100ms
  Ratio: 1:1 – 50:1
  Ess-Band: Listen On/Off
  Ess-Band Filter Freq/Width: 20Hz – 20kHz
• Dynamics 2: On/Off
  
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 - 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  
  Compressor: On/Off 
  Threshold; -60 – 0dB 
  Attack; 500us – 100ms 
  Release; 10ms – 10s 
  Ratio; 1:1 – 50:1 
  Gain; 0 to +40dB 
  with Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any source 
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn Order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Trim, EQ, Dyn, Fade/Mute, Inserts, Outputs, Full Safe
• Output Routing: Outputs, Insert A, Insert B, FX
• Fader: 100mm Motorised Fader ∞ to + 10dB